3880-PiezoDN-PtPdPlatineMaster-lin.quad (10.3 KB)
Hope that works
Is it possible to view my ICC as a photoshop curve so i can see how it is changing the values?
Sure - just make a curve that matches it. Just remember the screen can only approximate a print on paper, but you can see the change. If this is not enough then pull the shadows down a bit more. Maybe something like this which is close to what the Piezography ICC Profiler (part of PPEv2) default does.
I’m not sure how to find a visual representation of my ICC. I can’t in the older versions of Photoshop.
I’m done for tonight, but what version of Ps are you using? Soft-proofing is not exactly new. I still use CS6.
I’m using cs6 yeah…
To see a simulation of the curve you are baking into a new quad, simply create a PS Curve layer using the same points as in the Curve Adjustment spreadsheet. You can even save it as a preset to flip on and off. Just be sure you don’t make you negative with it on if using the adjusted quad!
For soft-proofing, first you need to make an ICC with QTR-Create-ICC-RGB. It is important to use the RGB version of the app if you want to simulate the color of the process. To do this, print a target that was made with your adjusted quad, read it, put that data into the Smoother and create a new CGATS text file, drag the text file to QTR-Create-ICC-RGB, put the icc that is created into your ColorSync folder (or whatever the equivalent of that is in Windows).
To set up soft-proofing in Photoshop: View > Proof Setup > Custom … Device to simulate > [your icc] … Preserve Numbers checked. (The simulate paper and black ink are like an unnaturally heavy layer of fog in my opinion.)
To turn it on and off: View > Proof Colors, or Command-Y.
I am presuming this works the same on Windows as it does on Mac. I could be wrong, but have no way to test it myself.
Using one soft-proof profile to compare against no proof is not going to show you what you are hoping to see. It will look paler and flatter than the non-soft-proofed view. You actually need 2 or more soft-proof iccs to compare to each other – one for the linearized quad and another for each adjusted version that you make and want to compare.
I’m not sure I have this 100% right. I’ve done it before successfully, but I don’t routinely use soft-proofing myself.
Thanks for this, it’s all really useful information.
I was wondering whether I could view the ICC I created on the Mac as a curve/6 point values though, so I could mimic this in the curve adjustment tool in windows, albeit milder
I don’t think you can take an ICC and plot a curve (or set of curves) from it, at least not without some special ICC analysis software that I don’t have. Maybe Walker can comment on that.
However, the curve screenshots above – both my last from Ps, and the previous that both of us posted from Curve Adjustment – show the effect that is being applied to either quad or icc. If you make a Ps curve using the same points, you are seeing the effect that the quad or icc will produce.
Alternatively, you could apply the curve to the image file and print with the linear quad to get the same (or nearly the same) result in a print. The purpose of modifying the quad or using an icc is to avoid having to do this. Whatever you way you choose, do not apply both simultaneously unless you want to multiply the effect!
Ahh ok thanks
Also, just realized I sent you the wrong quad to adjust…
That could be whythe last one I printed was very flat. The first lin was too strong. 3880-PiezoDN-PtPdPlatineMaster-lin-lin.quad (10.3 KB)
Is curve in the screen shot you posted your personal one?
From what I remember you saying before is that you printed your images without adding a curve or ICC.
Will do some reading regarding soft proofing my monitor
Had to make a small change to the name to keep it below 40 characters.
3880-PiezoDN-PtPdPlatineMaster-lin2-adj.quad (8.3 KB)
Thanks once again!..
Just one I did quickly that I think might be what you need. I’m guessing that what you posted above will be too mild, but printing with it and judging by eye is really the only way to tell. It’s very close to the default icc that is created by the PPEv2 icc tool and the app that goes with it. (Not the same as the QTR-Create-ICC default which I think is way too heavy.)
I should have a screenshot of a graph showing the difference between the default results from QTR-Create-ICC and Piezography-ICC-Profiler, but I can’t seem to find it. I have posted it on the forum before somewhere. If I can find the data I will recreate it and post it here later.
I do have a personal adjustment curve that I have used a few times and seems to do what I want. It is a very gentle S-curve.
Would be good to try my quad with the PPEv2 ICC curve if you think mine is too mild
Here is a graph that shows the default “characteristic curves” of ICCs created by QTR-Create-ICC and Piezography-ICC-Profiler. By default I mean what is made directly from the straight CGATS data without any further modification or custom shaping.
Funny, from this it looks like the PPE-ICC would increase the highlights more than the QTR-ICC.
Would expect the QTR-ICC to rise above ‘linear’ in the highlights. I’ve noticed a big contrast boost both in upper and lower values with it. It’s effect was welcome in the shadows, albeit too much. However, I didn’t like that it made the highlights brighter.
Neither of these shows a boost in highlights. I have been going by the assumption that you are using Windows and therefore QTRgui which has no means of using ICCs. I thought you have mentioned that several times. Am I mistaken? Are you printing from a Mac?