Starting Point for Blending Curves

Hi Walker,

Would a good starting point for experimenting with the blender tool be to print a neutral print from a neutral blend of the warm and cool curves to check that the default ‘28’ setting in the blending tool is in fact, accurate for the particular paper ?

Thanks,

Tom

Actually the best way to do this is to load the Warm and Cool curves into QTR (not neutral) and actually just print 28% warm. Then slide around to find the neutral with the sliders first. This will tell you the percentage to use in the blender tool when fine-tuning/making the neutral curve.

 

best,

Walker

Cheers Walker, that worked well.

:slight_smile: