Hello Keith
Thank you for your help!
1.-Yes I’m Using PPev2 on a Epson 3800, I don’t know how to limit the master file in this system, can you guide me on this?
2 I’m printing Palladium+Ferric Oxalate+Na2/ Developing on Ox Pot
3.- I printed the target using the " Pro-PiezoDN-PtPd-DevOut" curve and my standard exposure time (measure it with a LightMeasure UV Exposure Meter and a Amergraph ULF28 unit (around 5 minutes))
4.-Yes, you are right I was dropping the files on the wrong app (QTR-Linearize_data), dropping to QTR-Linearize_quad is working fine now.
5.- I don’t have any measurement file yet , I just printed the 129 target using the “Pro-PiezoDN-PtPd-DevOut” curve when I saw that I should limit my density I started thinking on the process and make some initial test of how to limit the density.!
6- Do you think its OK to have my highlights blown using my actual Analog+digital setup (see image attached)?
7.- Before Installing the Piezo inks I was working with OEM inks on the same printer using QTR and the quad file attached, and my tonal scale was very good.
PALADIO_P800_Revere_Ini_GC_3800uv.quad (5.8 KB)
Thank you again!
Best
Moises Levy
