Missing curves for 7900-9900-Pro-K5 and 7900-9900-Pro-K4

Piezography Professional Tools
1

I’m setting up a 7900 as a Pro printer, and as I get ready to configure it for DTP, I am noticing a handful of curves missing from my install. I just double-checked the Piezography-Community-Edition-v3.2.1.pkg, and these are not there.

7900-9900-Pro-K4
x900-Uncoated-Cool
x900-Uncoated-Neutral
x900-Uncoated-Warm
x900-Epson-ExhFibre-Cool
x900-Epson-ExhFibre-Neutral
x900-Epson-ExhFibre-Warm
x900-Epson-UltPremGlossy-Cool
x900-Epson-UltPremGlossy-Neutral
x900-Epson-UltPremGlossy-Warm
x900-Epson-UltPremLuster-Cool
x900-Epson-UltPremLuster-Neutral
x900-Epson-UltPremLuster-Warm
x900-Hahn-DagCanvas-Cool
x900-Hahn-DagCanvas-Neutral
x900-Hahn-DagCanvas-Warm
x900-Ilford-MonoSilk-Cool
x900-Ilford-MonoSilk-Neutral
x900-Ilford-MonoSilk-Warm

7900-9900-Pro-K5
x900-Canson-EdEtch-Cool
x900-Hahn-PhoRagBaryta-Cool
x900-Epson-HotPress-Cool
x900-Epson-HotPress-Neutral
x900-Epson-HotPress-Warm

Any chance those just got overlooked when that package was built?

2

Checking on this one.

Any chance those just got overlooked when that package was built? If not, is there a recommendation for the starting point for curve creation?

3

I did some digging around in the /Piezography/Curves directory at all the various printers that have K4 and K5 curves and found a few substitutes.

For 7900-9900-Pro-K4
x900-Uncoated-Cool sub with P7000-P9000-Pro-K4/Px-Uncoated-Master-Cool.quad
x900-Uncoated-Neutral sub with P7000-P9000-Pro-K4/Px-Uncoated-Master-Neutral.quad
x900-Uncoated-Warm sub with P7000-P9000-Pro-K4/Px-Uncoated-Master-Warm.quad

For 7900-9900-Pro-K5
x900-Canson-EdEtch-Cool sub with 4900-Pro-K5/x900-Canson-EdEtch-Cool.quad
x900-Hahn-PhoRagBaryta-Cool sub with 4900-Pro-K5/x900-Hahn-PhoRagBaryta-Cool.quad