I appear to be losing density in the leading edge (as printed) of my negatives. As you can see by the attached images the finished print has a band across the top which is quite lighter before it begins to print at the correct density. On the screen in print tools there is no band as you can see by the other image. The 8 x10 image is printed on 11x17 Pictorio so there is about 75 mm (3 inch) free space. I did put a strip across the top about an 1/2 above the image so the printer would start the ink flowing as I first thought the ink was just takings its time to come through but this never resolved the issue.
Thoughts ?
Shane
