Here’s my curve for Ilford Semi-Matte Warm Tone on epson display trans. I had to limit the dmax kinda sharply to accommodate for the display tran’s low ink tolerance, so there’s a dip in the top as you’ll see in the total ink limit, but it seems to print and soft-proofs ok. I’m gonna keep tweaking it and see if I can get something more normal. The orange channel is there, I don’t know why it doesn’t show up in Curve Viewer for me..
Note-- this is using PK ink, not matte. 3200k LED strips with a lot of ND filters over them cuz they’re way too bright.
PDN_SFZ_SILVER_ISMWT_15sec_EDT.quad (8.4 KB)
My channel mapping is:
1: PK HD
2: C
3: OR
4: LC
5: Y
6: M
(LM: GO, not used)