Changing a channel


Hello Walker,

I am having an issue with the C channel on the 9900, and since I have no plans now to print glossy, I thought I would map the C channel to the LLK channel where the gloss optimizer sits unused. My approach is as follows:

place the chip from the LLK cart onto the C cart and place into the LLK slot,

using print tool, purge print the gloss optimizer out of the line/damper/head replacing it with cool dark ink,

write 0s into the C channel of the curve I am using, paste into the LLK channel the values from the C channel,


Is this the best approach ?




All correct!!!



Cheers Walker !