Hi @sperry. I’m not sure how those would translate to the sliders in QTR Print Tool. In my earlier testing, I found the transitions were more to my liking when I did the blend in the PPE2 worksheet.
When I was digging into this topic, this forum post was very helpful and is playing with these recipes in Print Tool.
Experimenting with Piezo Pro curves – and emulating classic Agfa papers
Also, the original Original K7 Special Edition mix:
Shade 7 = Neutral shade 7
Shade 6 = Neutral shade 6
Shade 5 = Selenium shade 5 (cool)
Shade 4 = 50% Carbon shade 4 and 50% Selenium shade 4 (neutral’ish)
Shade 3 = 75% Carbon shade 3 and 25% Selenium shade 3 (more warm)
Shade 2 = Carbon shade 2 (warm)
Shade 1 = Piezography K7 shade 1 black
If I were going to try in using the sliders, this is where I would start.
Highlights: 100% Neutral *remember Neutral is approx: 80%cool and 20%warm
Midtones: 50% Warm & 50% Cool
Shadows: 100% Warm